TSR4280 Tracked Radial Stacking Conveyor

TSR4280 Tracked Radial Stacking Conveyor

Overview

The Peterson TSR4280 Tracked Radial Stacking Conveyor is an innovative conveyor which can often eliminate the need for a wheel loader.

Fed by a large hopper, the generous 42-inch wide (107 cm) conveyor can easily keep up with horizontal grinders or screens. The 80-foot conveyor length can stack materials up to 35 feet high (1100 cm).

The TSR4280 Tracked Radial Stacking Conveyor is powered by a fuel efficient, 58 hp Kohler diesel engine. The engines are Tier IV compliant with no DPF for lower maintenance and operating costs.

Where the TSR4280 Tracked Radial Stacking Conveyor really excels is the ability to make 180° rows with over 11,000 cubic yard (8,435 m³) stockpiles in each row, a feature not found on many stacking conveyors.

The TSR4280 Tracked Radial Stacking Conveyor allows you to continually operate while conveying the material away from the feeding machine. This eliminates the need for double material handling with traditional wheel loaders, which can make a significant difference to your bottom line.

TSR4280 Tracked Radial Stacking Conveyor is easily repositioned with the powerful tracks to extend the pile or move to the next site. The machine can be setup in just minutes. The safe, simple hydraulic controls ease unloading, moving, setup, and tear down.

The folding head section and optional folding tail, creates a compact travel position that reduces transportation length.

TSR4280 Tracked Radial Stacking Conveyor

Features


Up to 180° Stockpiling

With up to 180°of rotation, you can stack even larger piles. The radial movement allows greater volume and control where you want to put your product.


Remotely Operate the TSR4280 from Arms Reach

Fully-functional remote control operates the entire system, enabling a single-person operation. Pause and resume with the push of a button!

 


Special In-Feed Hopper

The TSR4280’s in-feed hopper has been specifically designed to handle organic material to enable smooth feeding to the conveyor without bridging.

 


Unique Belt Scraper

The TS4280 is equipped with a flexible finger belt scraper, specifically designed to work with a cleated belt. This eliminates material build up on the rollers ensuring uptime.


Simple Controls

The TS4280 has easy to use controls at the machine for raising and lowering the conveyor as well as folding for transportation.


Generous Conveyor

The generously large cleated conveyor will move your material efficiently.


Engine Access

The engine access door makes maintenance and operation easy.


Impressive Engine

The TS4280 is powered by a fuel efficient, 58 hp Kohler diesel engine. The engines are Tier IV compliant with no DPF for lower maintenance and operating costs.

TSR4280 Tracked Radial Stacking Conveyor

Specifications

Dimensions

Travel Length
51' 3" (1562 cm)
Travel & Operating Width
8' 4" (254 cm)
Conveyor Travel Loading Height
4' 3" (130 cm)
Conveyor Operation Height
31' 3" (953 cm)
Conveyor Operation Angle
22 degrees
Conveyor Operation Length (Overall Length)
77' 5" (2360 cm)
Hopper Height
7' 10" – 9' 3" (239–282 cm)
Conveyor Operation Ground Clearance
2' 7" (79 cm)
Track Width
1' 3"(390 mm)
Track Center Width
5' 6" (168 cm)
Inside Track Width
4' 10" (148 cm)
Track Drive Center to Idler Center
13' 1" (400 cm)

Weight

Weight
33,070 lbs (15000 kg)

Powertrain

Engine
Kohler KDI 1903 TCR 56.3 HP
Fuel Tank Capacity
47 gal (178 L)
Hydraulic Tank Capacity
53 gal (200 L)

Capacity

Capacity
500 tons per hour

Conveyor

Conveyor Length
77' 5" ( 2360 cm)
Conveyor Width
42" (107 cm)

Windrow Volume (20° Luffing)

90° Radial
6,380 yds³ (4,880 m³)
120° Radial
180° Radial
11,030 yd³ (8,435 m³)

Optional Equipment

Wireless Track Remote
Dust Cover
Impact Bed in Feed Area
Dust Suppression
Hydraulic Folding Tail Section
Full Length Skirt Boards
Belt Scale
Upgraded Belts
1/2" Hardox Hopper Liners

Specification subject to change without notice.

TSR4280 Tracked Radial Stacking Conveyor

Videos

Product Info



Request More Info


  • This field is for validation purposes and should be left unchanged.